 |
|
When changing the plate, be careful not to leave your fingerprints on the plate or cover.
How to use the downloaded cutout plates
| 1. |
Check the print size.
Put a ruler up against the "Scale" on the upper right end of the sheet and check if the printed size is correct. If incorrect, make printer adjustments to correct the print size. |
|
| 2. |
After checking the print size, use a cutter (or scissors) to cut away the outside of the design plate.
|
| 3. |
Cut holes for the screws in two locations. |
|
| 4. |
Cut away the center window portion.
Since the cut edges here will be visible, be sure to cut as accurately and neatly as possible. |
How to attach the downloaded cutout plates
| 1. |
Loosen the screws with the supplied hex screwdriver. |
|
| 2. |
Remove the plate cover and the standard plate. |
|
| 3. |
Replace with a downloaded cutout plate.
Add the transparent plate (supplied) between the cutout plate and the plate cover in order to attach the plate cover in place. |
|
Notes:
 |
Be sure to keep the hex screwdriver for future use. |
|
Two spare screws for the plate cover attachment are provided with the unit. (See the Installation/Connection Manual.) |
|
When you attach the plate cover, do not tighten the screws too hard; otherwise, the plate cover might be cracked. |
|
|
