Car Navigation Updates

KV-PX501

KV-PX501 Firmware Update Procedures

1. Preparation: Format and copy the firmware to an SD card

[Necessary equipment]

  • SD Memory Card (512MB and above)
  • Firmware

Download "V10809_V1.08.09.zip (13.6MB in size)" from the Download page and double click to extract the data to desired destination on your PC.

1) Format an SD card using your PC.

Notes:

  • Do not use SD card with FAT32 file system format.
  • Brand-new SD card does not require formatting.

2) Copy the firmware to the SD card.

After extracting the download file on your computer, copy NK.bin and "update" folder to the root directory of the SD card.

2. Updating the firmware

1) Insert the SD card for update into the unit as shown.

  Insert the SD card for update into the unit as shown

2) Plug in the AC adapter to the unit.

  Plug in the AC adapter to the unit

3) Update starts automatically.

This procedure will take about 2.5 minutes.

  This procedure will take about 2.5 minutes

4) After update, applications are then copied over to the device.

Wait for a while.

  Wait for a while

5) Shell interface will launch automatically when the firmware update finishes.

  Shell interface will launch automatically as soon as the completion of firmware update

6) Confirm software version.

Press "SETTING" → "VERSION" and Look for V1.08.09 at the bottom of the list.

Confirm software version Confirm software version Confirm software version

7) Unplug the AC adapter.

8) Pull out the SD card.


JVC MOBILE ENTERTAINMENT