Firmware Download for GZ-RX500, GZ-RX510, GZ-RX515, GZ-RX520, GZ-RX530
This file is a firmware update file for the following JVC Everio Wi-Fi models.
Download the file and save it to your PC desktop.
Set Everio to "Update" mode and follow the onscreen instructions to update the firmware.
GZ-RX500**, GZ-RX510**, GZ-RX515**, GZ-RX520**, GZ-RX530**
This file is exclusively for the above models. Please do not use the file with the models other than those described above to avoid malfunction.
|10.Jan. 2020||In some cases, after connecting the recorder or PC with the USB cable and disconnecting the cable, the power may not be turned on occasionally.||GZ-RX500**
Power failure during update may cause Everio malfunction. As we may charge the user for the repair in such cases, please read the following cautions and the software license agreement carefully and follow the update instructions.
We recommend you to back up the data stored in the internal memory before updating.
To secure power supply during update, connect the AC adapter to Everio. Before updating, be sure to charge the battery capable of shooting for 30 minutes or longer.
Do not remove the AC adapter, or turn off the power switch during update as power failure causes Everio malfunction.
Do not touch or shake Everio during update as power failure causes Everio malfunction.
Firmware update files differ according to the models. Be sure to use the correct file for the model.
Read Before Download
Software License Agreement
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE CLICKING "ACCEPT" AT THE BOTTOM OF THIS PAGE.
Subject to the conditions below,JVCKENWOOD Corporation ("JKC") grants to End-User ("You") a right to use the Firmware Update Software ("Software") for HD Memory Camera; GZ-RX500**, GZ-RX510**, GZ-RX515**, GZ-RX520**, GZ-RX530** ("Everio").
By clicking "ACCEPT" at the bottom of this page, You are deemed to agree to be bound by the conditions of this Software License Agreement ("Agreement").
You may make a copy of the Software for your back-up and storage purpose only.
- i)You may not modify, reverse engineer, decompile or disassemble the Software in any manner.
- ii)You have no right to grant a license to use the Software, and may not distribute, lease or rent the Software to any other person for any purpose.
- iii)You shall comply with the laws and regulations of the applicable countries of the Software.
- i) Each such copy contains copyright and/or other proprietary rights notice in the same manner as appeared on this Agreement and the Software.
- ii) In case You distribute each such copy by on-line or other media, You must display notices as required to appropriately protect copyright and other proprietary rights of JKC on these media.
YOU WILL EQUALLY INDEMNIFY AND HOLD HARMLESS THE AUTHOR OF THE THIRD PARTY SOFTWARE FROM SUCH DAMAGES. JKC SHALL REGARD THAT YOU CONSENT TO MAKE NO CLAIM OF ANY KIND TO THE AUTHOR OF THE THIRD PARTY SOFTWARE.
The warranty of JKC shall not exceed the applicable warranty coverage of Everio.
Should this Agreement be terminated, You must discontinue the use of the Software, and shall not be allowed to possess the Software installed in Everio.
JKC may add and/or modify articles on this Agreement without notice. In such a case, you should agree that the new articles will be applied for usage of the Software.
Should any of the conditions of the Agreement be void under Japanese law, the rest of the conditions remain valid.
The Agreement shall be governed by and interpreted under the laws of Japan. The Tokyo District Court has jurisdiction over all disputes which may arise with respect to the execution, interpretation and performance of this Agreement.