Digital Audio Player Download

XA-F107/F57 Firmware Ver.1.024

Released on: 11/08/2006

File description

  • This file is for JVC digital audio player XA-F107/F57 firmware Ver.1.024.

* Exclusively for XA-F107/F57. Do not use for other models as it may cause malfunction.

* Check the firmware version before downloading.
Firmware version can be checked using "Version Check Mode" under the main menu of the main unit.

Main updates history

Ver.1.024
  • Background noise during playback has been reduced.
  • Stability during power up has been enhanced.

Precautions before update

  • The data will be formatted when updating the firmware using this software. Therefore, make a backup to the computer or other devices in advance before update.
    In addition, as all settings will be initialized, it is required to perform settings again.
  • Stop antivirus program and resident program.
  • If there are other USB devices, disconnect their cables.

Update procedures

  1. Connect to computer after switching off the power of the main unit, and check that it is recognized normally.
    If the main unit is not recognized, perform the procedures here.
  2. Double-click the downloaded file to start the installation. Folders and files will be created.
    However if update is performed once, it will be uninstalled first. After uninstalling, perform update again.
    Double-click the downloaded file again to install.
    Installation should be performed with program (computer) first, and then update (main unit) using the program. Follow the instruction of the setup screen.
  3. When the setup wizard is completed, a check button asking whether to update firmware will be displayed. Tick the "Start Firmware Update" and click the "Finish" button. (If not ticked, only setup is completed and it ends here without performing data update.)
  4. Next, read "Before Use" and click "OK" only if you agree with the contents.
    (If data is not to be updated, click "Cancel" to end.)
  5. Click "OK" to show firmware update screen. At this point of time, updating data of the main unit can be escaped using explorer.

    * Depends on the computer in use, explorer will pop up automatically when the main unit is recognized.

    * If the main unit cannot be recognized or if recognized but the data is corrupted, update cannot be escaped.

    Next, tick "Formatting Data Area" and click "Start" button.
  6. "Complete" displayed and update is completed. Close the screen with "Close" button.

    [Caution] Do not continuously update twice.

  7. To check the update, use "Version Information" on the main unit instead of the firmware update screen.

Hereby the update is completed.

File download

Read the software agreement carefully and download the file only if you agree with the contents.

DOWNLOAD
xaf57ex-update-1024.exe(1,914KB)

PAGE TOP
/body>